REAR SUSPENSION, OUTLINE
R–7
R
During unloading of passengers and cargo
• When the vehicle height is higher than the
designated load level, oil flows back into the low-
pressure chamber from the high-pressure
chamber via the pump rod leveling port. As a
result, pressure in the high-pressure chamber
decreases, rod reaction force is reduced, and the
vehicle height returns to the designated load
level.
.
End Of Sie
SUPPLEMENTAL SERVICE INFORMATION
A6E740201013205
• The following changes have been made since publication of the Mazda6 Workshop Manual (1730-1*-02C).
Front wheel alignment (WGN)
• Specifications have been added.
Rear wheel alignment (WGN)
• Specifications have been added.
Suspension control system (WGN)
• On-vehicle inspection procedure has been added.
Rear shock absorber (WGN)
• Removal/installation procedure has been added.
• Disposal procedure has been added.
Rear stabilizer (4WD)
• Removal/installation procedure has been added.
Trailing link (4WD)
• Removal/installation procedure has been added.
Rear crossmember (4WD)
• Removal/installation procedure has been added.
End Of Sie
1 Leveling port
2 Low-pressure chamber
3 High-pressure chamber
3
1
2
A6E74162004
OUTLINE
To Next Page