Mazda Mazda6 - Page 803

S–22
TRIM
3. Remove the screw, then remove the bracket.
4. Remove the cargo hooks.
5. Remove the fasteners, then remove the trunk
side trim.
6. Install in the reverse order of removal.
End Of Sie
TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION
A6E774468860202
WGN
1. Remove the tire house trim.
2. Remove the rear seat remote lever.
3. Remove the cargo hooks.
4. Remove the screw.
5. Pull the trunk side upper trim toward you, then
remove the hooks A, C, D and clips B, pin E from
the body.
6. Remove the trunk side upper trim.
7. Install in the reverse order of removal.
End Of Sie
FASTENER
TRUNK SIDE TRIM
CARGO HOOK
FRONT
SCREW
BRACKET
A6E77441106
B
A
D
C
A
B
C
E
D
SCREW
TRUNK SIDE UPPER TRIM
CARGO HOOK
FRONT
HOOK C
HOOK D
HOOK A
PIN E
CLIP B
A6A7744W107