Mazda Mazda6 - Page 804

TRIM
S–23
S
TRUNK END TRIM REMOVAL/INSTALLATION
A6E774468890201
WGN
1. Pull the trunk end trim upward, then disengage
clips A and pins B from the body.
2. Remove the trunk end trim.
3. Install in the reverse order of removal.
End Of Sie
LIFTGATE UPPER TRIM REMOVAL/INSTALLATION
A6E774468930201
WGN
Without rear spoiler
Caution
• Removing the liftgate upper trim by pulling on the middle section of the trim could damage the
high-mount brake light. When removing the trim, be sure to pull on the side edges of the trim only.
1. Pull the liftgate upper trim on the side edges
towards you, then disengage pins A from the
body.
2. Pull the middle section of the trim towards you
and disengage clips B and pin C from the body.
3. Remove the liftgate upper trim.
4. Install in the reverse order of removal.
With rear spoiler
1. Pull the liftgate upper trim toward you, then
disengage the pin A, C and clip B from the body.
2. Remove the liftgate upper trim.
3. Install in the reverse order of removal.
End Of Sie
A
B
A
A
B
A
A
A
B
TRUNK END TRIM
PIN B
CLIP A
A6A7744W108
A
C
B
A
B
CLIP B
PIN A
LIFTGATE UPPER TRIM
PIN C
A6A7744W109
A
B
A
B
C
CLIP B
PIN C
LIFTGATE UPPER TRIM
PIN A
A6A7744W110