BRAVO TWO GEAR HOUSING
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 3C-19
3. Press drive shaft pinion bearing inner-race onto drive shaft until race is fully seated,
using universal puller plate.
24210
a
b
c
a-Drive Shaft
b-Pinion Bearing Inner-Race
c-Universal Puller Plate (91-37241)
Bearing Carrier
Inspection
1. The condition of the propeller shaft tapered roller bearing cup is an indication of the
condition of tapered roller bearing on propeller shaft. Replace bearing and cup if cup is
pitted, grooved, scored, worn, uneven, discolored from overheating or has embedded
metal particles.
2. Check bearing carrier for signs of corrosion, especially on gear housing to bearing
carrier mating surfaces. If corrosion is evident, replace bearing carrier.
To Next Page
Loading...
Need help?
General