OILDYNE TRIM PUMP
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 5A-23
110 Amp Fuse Test (Pump Out of Boat)
1. Connect the ohmmeter leads between the terminals on the fuse.
22493
b
a
a-110 Amp Fuse (Red)
b-Ohmmeter Leads
2. Zero Ohms Reading (Full Continuity)-Fuse OK.
High Ohms Reading (No Continuity)-Replace fuse.
20 Amp Fuse Test
1. Remove the fuse from the fuse holder.
22496
a
a-Fuse Holder
To Next Page
Loading...
Need help?
General