BRAVO TWO GEAR HOUSING SERVICE MANUAL NUMBER 28
Page 3C-20 90-863160 MAY 2000
Disassembly
1. Perform Method “a or b,” following:
a. Method A – If Replacing Propeller Shaft Needle Bearing
(1.)Press needle bearing and oil seals from carrier.
NOTE: Needle bearing MUST BE replaced, if removed.
50023
a
b
d
e
a-Needle Bearing
b-Oil Seals (2)
c-Driver - 91-55919
d-Driver Rod
e-Bearing Cup
b. Method B – If Propeller Shaft Needle Bearing Replacement is NOT Required
(1.)Pry oil seals from carrier.
50024
a
b
a-Oil Seals (2)
b-Pry Bar Or Screwdriver
To Next Page
Loading...
Need help?
General