POWER STEERING SERVICE MANUAL NUMBER 28
Page 6A-26 90-863160 MAY 2000
12. Remove magnet.
22154
a
a-Magnet
Cleaning And Inspection
1. Clean and inspect all metal parts.
Reassembly
NOTE: All references to Power Steering fluid refer to Quicksilver Power Trim and Steering
Fluid, or Dexron II if Quicksilver product is not available.
NOTE: Obtain and install a new seal kit 5688044 from a local GM automotive dealer when
reassembling pump.
1. Install new pump shaft oil seal metal side up. Support the pump reservoir so that the
back does not distort.
22151
a
b
c
a-New Oil Seal
b-1 in. Socket
c-Pump Reservoir
2. Lubricate pressure plate O-ring with power steering fluid and place in the third groove
in the housing.
To Next Page
Loading...
