DRIVE SHAFT HOUSING SERVICE MANUAL NUMBER 28
Page 3A-14 90-863160 MAY 2000
Separate Housings
1. Remove, empty and clean gear lube monitor.
2. Drain drive unit at location “a” or “b,” as applicable, by removing fill/drain screw.
22103
a
b
a-Fill/Drain Screw (Bravo Two)
b-Fill/Drain Screw (Bravo One)
3. Remove vent plug.
50072
a
a-Vent Screw
4. Bravo One, Bravo XZ, Bravo XR, and Diesel Bravo One X:
a. Remove rubber plug.
22093
a
a-Rubber Plug
To Next Page
Loading...
Need help?
General