Mercury BRAVO

2
A
REMOVAL, INSTALLATION AND ADJUSTMENTS
SERVICE MANUAL NUMBER 28
90-863160 MAY 2000 Page 2A-1
REMOVAL, INSTALLATION AND ADJUSTMENTS
Section 2A - All Models
Table of Contents
Torque Specifications 2A-2. . . . . . . . . . . . . . . . . .
Lubricants / Sealants / Adhesives 2A-2. . . . . . .
Tools 2A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transom Thickness and Surface 2A-3. . . . . . . .
Special Information 2A-4. . . . . . . . . . . . . . . . . . . .
Bravo Three Notice:
Trim-In Limit Insert 2A-4. . . . . . . . . . . . . . . . .
Sterndrive Unit Removal 2A-6. . . . . . . . . . . . . . .
Transom Assembly Removal 2A-8. . . . . . . . . . .
Transom Assembly Installation 2A-12. . . . . . . . .
Sterndrive Unit Installation 2A-22. . . . . . . . . . . .
Shift Cable Installation
and Adjustment 2A-29. . . . . . . . . . . . . . . . . . .
Troubleshooting Shift Problems 2A-33. . . . .