CORROSION PROTECTION - ALL MODELS SERVICE MANUAL NUMBER 28
Page 7A-6 90-863160 MAY 2000
Anodic Plate
75251
a-Anodic Plate
CAUTION
DO NOT paint new anodic plate, as this will render it ineffective as a galvanic corro-
sion inhibitor.
Bravo One Sterndrive Units
1. Remove plug from driveshaft housing to gain access to attaching screw.
22093
a
a-Rubber Plug
2. Use a 1/2 in. standard socket and extension to loosen screw and remove anodic plate.
76800
b
c
d
e
a
a-Anodic Plate
b-Rubber Plug (Removed)
c-1/2 in. Socket
d-Extension
e-Screw
To Next Page
Loading...
Need help?
General