Mercury BRAVO Service Manual

SERVICE PROCEDURES REQUIRING MAJOR DISASSEMBLY SERVICE MANUAL NUMBER 28
Page 4B-10 90-863160 MAY 2000
Bell Housing Removal
1. Remove sterndrive unit. Refer to Section 2A.
2. Remove shift cable from bell housing by loosening anchor screws and disconnecting
shift cable end guide from shift bracket.
3. Remove end guide.
22183
a
b
a-End Guide
b-Anchor Screws (2)
4. Remove flanged nut. Hold shift cable retaining nut with wrench.
76673
a
b
c
a-Shift Cable Retaining Nut
b-Seal Washer
c-Flanged Nut
5. Turn tapered insert counterclockwise to remove from I.D. of water hose.
6. Remove water hose from bell housing.
50322
a
b
c
d
a-Bell Housing
b-Tapered Insert
c-Tapered Insert Tool (91-43579)
d-Water Hose

Mercury BRAVO Specifications

General

Brand	Mercury
Model	BRAVO
Category	Engine
Language	English