Assembly - continued
5. Slide the valve pin and the valve pin guide into the heated body.
1. Valve pin 2. Valve pin guide 3. Heated body
1
2
3
Figure 11-6 Install valve pin and valve pin guide
6. Insert the valve pin holder into the heated body slot and over the head of
the valve pin.
Valve pin
holder
Valve pin
head
Figure 11-7 Insert valve pin holder
11-6
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
SLIMSTACK ACTUATOR
Hot Runner User Manual
To Next Page
