7. Insert the head of the valve pin into the keyhole slot on the valve pin
holder.
Valve pin
holder
Valve pin
head
Figure 11-8 Insert head of valve pin into keyhole slot
8. Slide the valve pin holder to locate the valve pin head in the narrowed
portion of the slot. See Figure 11-9.
Narrowed
portion
Figure 11-9 Locate the valve pin head in the narrowed portion
Assembly - continued
11-7SLIMSTACK ACTUATOR
Hot Runner User Manual
© 2020 Mold-Masters (2007) Limited. All Rights Reserved.
To Next Page
