NEC ELECTRA ELITE IPK II - Page 538

___________________________________________________________________________________
11 - 34 Installing Electra Elite Optional Terminal Equipment
___________________________________________________________________________________
Document Revision 3 Electra Elite IPK II
9. With the base unit attached to the wall, hook the two bottom
tabs in the tab slots on the Multiline Terminal base.
10. Push up on the Terminal and lock the top base unit tabs in the
top slots on the terminal. Figure 11-44 Attaching the Top Tabs
of the Multiline Terminal to the Base Plate shows how the
Multiline Terminal is attached.
Figure 11-43 Attaching the Bottom Tabs of the Multiline
Terminal to the Base Plate
Figure 11-44 Attaching the Top Tabs of the Multiline
Terminal to the Base Plate
Wall
Base Unit
Tab Slots
Multiline
Terminal
Tab
Line Cord
Wall
Wall Mount Unit
Tab Slots
Multiline
Terminal
Tabs
Line Cord