Features
2
VarioLink 2221/2821/3621 2-5
2.3 Scan to SMB
The Scan to SMB operation is used to send the scanned data of an original
document to a shared folder on a computer on the network. By registering a
destination with a one-touch dial button, paper documents can be converted
into data and sent simply by touching a button in the One-Touch screen.
In order to perform a Scan to SMB operation, a shared folder must be
specified in advance on the computer where the data is to be received.
- Data cannot be saved in shared folders created on the domain controller
of Windows Server 2003 and Windows Server 2008.
- The original document is sent as an image file in the TIFF format or PDF
format.
- You can specify that an e-mail message be sent to notify the recipient of
the location where the data was saved when the Scan to SMB operation
is complete (E-mail Notification function).
- Images in the TIFF format can be viewed with a TIFF viewer, which is
standard in Windows.
- Images in the PDF format can be viewed with Adobe Reader.
- This machine must be connected to a LAN, and the network settings
must be specified. For details, refer to Chapter 2, "Setup" on page 3-3.
- For details, refer to Chapter 5, "Scan to SMB" on page 6-3.
To Next Page
Loading...
