Omron RX Series - Page 183

4 - 37
4 Parameter List
High-function General-purpose Inverter 3G3RX-V1 User’s Manual (I578-E1)
4-3 Extended Function Mode
4
4-3-3 Group C: Multi-function Terminal Function Parameters
C139 Multi-function
Output P5 OFF
Delay Time
0.0 to 100.0 0.0 Disabled Enabled s 5-60
C140 Multi-function
Relay Output ON
Delay Time
0.0 to 100.0 0.0
C141 Multi-function
Relay Output OFF
Delay Time
0.0 to 100.0 0.0
C142
Logic Output Signal
1 Selection 1
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00 Disabled Enabled – 7-132
C143
Logic Output Signal
1 Selection 2
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00
C144
Logic Output Signal
1 Operator
Selection
00: AND
01: OR
02: XOR
00
C145
Logic Output Signal
2 Selection 1
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00
C146 Logic Output Signal
2 Selection 2
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00
C147 Logic Output Signal
2 Operator
Selection
00: AND
01: OR
02: XOR
00
C148
Logic Output Signal
3 Selection 1
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00
C149
Logic Output Signal
3 Selection 2
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00
C150
Logic Output Signal
3 Operator
Selection
00: AND
01: OR
02: XOR
00
C151
Logic Output Signal
4 Selection 1
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00
C152
Logic Output Signal
4 Selection 2
Same as options for C021 to C026
(33 (LOG1), 34 (LOG2), 35
(LOG3), 36 (LOG4), 37 (LOG5),
38 (LOG6), 63 (OPO), and no
(NO) cannot be selected)
00
Parameter
No.
Function name Monitor or data range
Default
data
Changes during
operation
Unit Page
Normal b031 = 10
Output terminal operation function