Omron ZW-7000 Series - Page 228

Setting the Output Conditions
226
ZW-7000/5000
User's Manual
Setting Triggers
Setting Triggers p.147
As an example, here is an explanation of the procedure for selecting the “TIMING” trigger type setting.
Operating procedure
Steps Key operation Display Description
1 to 5 For moving to “HOLD”, see steps 1 to 5 in p.225.
6 Press the / keys to select “TRIG” and press the key.
7 Set the trigger method.
TIMING: External
SELF-U: SELF-UP
SELF-D: SELF-DOWN
SELF-V: VALID VALUE
“TYPE” is displayed on the main display and the current setting
v
alue is
displayed on the sub-display.
Press / key to enter editing mode and the sub-display blinks.
In this example, select “TIMING” and press the
key.
8 Press the key for two seconds to enter the RUN mode.