No. Tab Possible User Actions
4 Change Password • Specify the following information to change your password.
• Old password
• New password: Specify a password with a maximum of 64
characters. QNAP recommends using passwords with at least 6
characters.
• Specify an email address to receive a notification email to recover
your password if you forgot the password.
You need to configure SMTP settings in Notification Center to use
this feature.
• Click Apply to save all changes.
5 E-mail Account • Add, edit, and delete email accounts to use when sharing files.
• Click Apply to save all changes.
6 Miscellaneous • Enable the following settings as necessary.
• Auto logout after an idle period: Specify the duration of
inactivity after which the user is automatically logged out.
• Warn me when leaving QTS: When enabled, QTS prompts
users for confirmation whenever they try to leave the desktop
(by clicking the Back button or closing the browser). QNAP
recommends enabling this setting.
• Reopen windows when logging back into NAS: When
enabled, the current desktop settings (including all open
windows) are retained until the next session.
• Show the desktop switching button: When enabled, QTS
displays the desktop switching buttons < > on the left and right
sides of the desktop.
• Show the link bar on the desktop: When enabled, QTS
displays the link bar on the bottom of the desktop.
• Show the Dashboard button: When enabled, QTS displays
the button to show the dashboard on the taskbar.
• Show the NAS time on the desktop: When enabled, QTS
displays the current NAS time, day, and date at the bottom-right
of the desktop.
• Keep Main Menu open after selection: When enabled, QTS
keeps the main menu pinned to the desktop after you open it.
• Show a list of actions when external storage devices are
detected: When enabled, QTS displays an Autoplay dialog box
whenever an external storage device is inserted into a USB or
SATA port.
• Click Apply to save all changes.
QTS 4.5.x User Guide
Overview 22