To Next Page

To Previous Page

The Edit LUN Mapping window opens.

6. Select Map to iSCSI target.

7. Select an iSCSI target.

8. Optional: Select Enable LUN.

If selected, QTS will enable the LUN after mapping it to the target.

9. Click OK.

iSCSI LUN Actions

LUN Action Description

Disable Disable the LUN. The LUN will become inaccessible

to connected iSCSI initiators.

Enable Enable the LUN if it is currently disabled.

Modify Edit the LUN settings.

Delete Delete the LUN and all data stored on it.

Important

• This action is only available if the

LUN is unmapped.

• To delete a VJBOD Cloud LUN, use

the VJBOD Cloud app.

Edit LUN Mapping Unmap the LUN, or map it to a different iSCSI target

or Fibre Channel Port group.

For details, see the following topics:

• Mapping a LUN to a Fibre Channel Port Group

• Mapping a LUN to an iSCSI Target

Show in Storage & Snapshots Manage the LUN at Storage & Snapshots >

Storage > Storage/Snapshots

LUN Import/Export Export the LUN to another server, a local NAS folder,

or an external storage device.

For details, see LUN Import/Export.

iSCSI LUN Status

Status Description

Enabled The LUN is active and visible to connected initiators.

Disabled The LUN is inactive and invisible to connected

initiators.

iSCSI Targets

Creating an iSCSI Target

1. Go to iSCSI & Fibre Channel > iSCSI > iSCSI Storage .

2. Click Create, and then select New iSCSI Target.

QTS 4.5.x User Guide

iSCSI & Fibre Channel 309

QNAP QTS 4.5 Series User Manual

Questions and Answers: