QNAP QTS 4.5 Series User Manual

Setting Description
WINS Server Specify the WINS server IP address.
Tip
Windows Internet Naming Service
(WINS ) converts computer names
(NetBIOS names) to IP addresses,
allowing Windows computers on a
network to easily find and communicate
with each other.
DNS Suffix Specify the DNS suffix.
Tip
The DNS suffix is used for resolving
unqualified or incomplete host names.
TFTP Server Specify the public IP address for the TFTP server.
Tip
QTS supports both PXE and remote
booting of devices
Boot File Specify location and file name of the TFTP server
boot file.
Tip
QTS supports both PXE and remote
booting of devices
11. Click Next.
12. Configure the virtual switch IPv6 address.
Setting Description
Disable Do not assign an IPv6 address.
IPv6 Auto-Configuration (Stateful) The adapter automatically acquires an IPv6 address
and DNS settings from the DHCPv6-enabled server.
Important
This option requires an available
DHCPv6-enabled server on the
network.
IPv6 Auto-Configuration (Stateless) The adapter automatically acquires an IPv6 address
and DNS settings from the router.
Important
This option requires an available IPv6
RA(router advertisement)-enabled
router on the network.
QTS 4.5.x User Guide
Network & Virtual Switch 428

QNAP QTS 4.5 Series Specifications

General

Brand	QNAP
Model	QTS 4.5 Series
Category	Storage
Language	English