7.2.3 spanning-tree mst revision
Use this command to configure revision level of MSTP.
spanning-tree mst revision revision-level
no spanning-tree mst revision
【Parameter】
revision-level：MSTP revision level which is one of MSTP and it is the integer
number between 0 to 65535.
【Default】
The default value is 0.
【Command configuration mode】
Global configuration mode
【Example】
！Configure revision level of MSTP to be 10
QTECH(config)#spanning-tree mst revision 10
7.2.4 spanning-tree mst instance vlan
7-23
To Next Page
