Use spanning-tree mst instance command to configure the mapping relations
between MSTP instance and VLAN.
spanning-tree mst instance instance-num vlan vlan-list
no spanning-tree mst instance instance-num vlan vlan-list
【Parameter】
instance-num：MSTP instance number which is in the range of 1-15
vlan-list：vlan-list can be discrete number, a sequential number, and the mixture of
both. Discrete number can be separated by comma, and sequential number can
be separated by “-”, such as: 2, 5, 8, 10-20
【Default】
All vlan mapped to MSTP instance 0
【Command configuration mode】
Global configuration mode
【Example】
！Configure vlan 2-7 mapping to MSTP instance 2
7-24
To Next Page
