QTECH(config)#spanning-tree mst instance 2 vlan 2-7
7.2.5 spanning-tree mst instance instance-num priority
Use spanning-tree mst instance command to configure the priority of
networkbridge in some MSTP instance.
spanning-tree mst instance instance-num priority priority
no spanning-tree mst instance instance-num priority
【Parameter】
instance-num：MSTP instance number which is in the range of 0-15
priority：the priority of network bridge which is the integer times of 4096 in the
range of 0-61440
【Default】
The priority of network bridge in each instance is 32768.
【Command configuration mode】
Global configuration mode
【Example】
7-25
To Next Page
