no dot1x max-user
【Parameter】
host-num：The integer between 1 and 16
【Default】
The max-user of 100M ethernet port is 16
【Command configuration mode】
Interface configuration mode or global configuration mode
【Usage】
This command is effective after 802.1X authentication.
After 802.1X enables, max-user of a port is determined by the real situation. The
max-user of 100M ethernet port is 16
【Example】
！Configure the max-user of ethernet 0/5 is 10 in interface configuration mode
QTECH(config-if-ethernet-0/5)#dot1x max-user 10
8-29
To Next Page
Loading...
