QTech QSW-2900

Global configuration mode
【Usage】
Choose dot1x eap-finish or dot1x eap-transfer command according to RADIUS
server configuration. If authentication message transmitting way is different from
RADIUS server authentication message receiving way, authentication fails.
【Example】
！Configure authentication message tramsitting to be eap-transfer
QTECH(config)#dot1x eap-transfer
【Related command】
dot1x eap-finish
8.3.5 dot1x max-user
Use dot1x max-user command to configure the maximum number of supplicant
systems an ethernet port can accommodate. Use no dot1x max-user command to
configure the maximum number to be 1.
dot1x max-user host-num
8-28