【Example】
！Ethernet 0/5 is RADIUS server port. Configure port-control mode of ethernet 0/5
to be forceauthorized in interface configuration mode
QTECH(config-if-ethernet-0/5)#dot1x port-control forceauthorized
！Configure port-control mode of ethernet 0/5 to be forceauthorized globally.
QTECH(config)#dot1x port-control forceauthorized interface ethernet 0/5
【Related command】
dot1x
8.3.7 dot1x re-authenticate
Use dot1x re-authenticate command to re-authenticate current interface.
dot1x re-authenticate
【Command configuration mode】
Interface configuration mode or global configuration mode
【Usage】
8-32
To Next Page
Loading...
