filter configuration. Use no logging snmp-agent command to disable SNMP Agent
logging and restore to default filter configuration.
logging snmp-agent
no logging snmp-agent
logging snmp-agent { level | none | level-list { level [ to level ] } &<1-8> }
[ module { xxx | … } * ]
no logging snmp-agent filter
【Parameter】
level：Level of information ranges from 0 to 7
none：Any level is not allowed.
xxx：Means the name of the module. … means other modules are omitted.
【Default】
All SNMP Agent logging enable.
Filter regulations of all terminals are to allow all modules of levels 0 to 5 to output
information
【Command configuration mode】
10-22
To Next Page
Loading...
