【Parameter】
ftpserver-ip：IP address of FTP server
filename：Filename to be loaded
username、userpassword：Username and password of FTP server
【Command configuration mode】
Privileged mode
【Usage】
Open FTP server and set username, password and file download path before use
this command. Reboot the switch after successful download and run new
application program.
【Example】
！Download application program app.arj to 192.168.0.100 by FTP
QTECH#load application ftp 192.168.0.100 app.arj username password
12.2.2 load application tftp
12-8
To Next Page
Loading...
