Use load application tftp command to load application program by TFTP protocol.
load application tftp tftpserver-ip filename
【Parameter】
tftpserver-ip：IP address of TFTP server
filename：Filename to be loaded
【Command configuration mode】
Privileged mode
【Usage】
Open TFTP server and set file download path before use this command. Reboot
the switch after successful download and run new application program.
【Example】
！Download application program app.arj to 192.168.0.100 by TFTP
QTECH#load application tftp 192.168.0.100 app.arj
12.2.3 load application xmodem
12-9
To Next Page
