！Download configuration program abc to 192.168.0.100 by FTP
QTECH#load configuration ftp 192.168.0.100 abc username password
12.2.5 load configuration tftp
Use load configuration tftp command to load configuration program by TFTP
protocol.
load configuration tftp tftpserver-ip filename
【Parameter】
tftpserver-ip：IP address of TFTP server
filename：Filename to be loaded
【Command configuration mode】
Privileged mode
【Usage】
Open TFTP server and set file download path before use this command. Reboot
the switch after successful download and run new configuration program.
12-12
To Next Page
Loading...
