【Example】
！Download configuration program abc to 192.168.0.100 by TFTP
QTECH#load configuration ftp 192.168.0.100 abc
12.2.6 load configuration xmodem
Use load configuration xmodem command to load configuration program by
Xmodem protocol.
load configuration xmodem
【Command configuration mode】
Privileged mode
【Usage】
Choose “send” -> “send file” in super terminal, and input full path and filename of
the file in filename dialog box, and choose Xmodem protocol in “protocol”, then
click 【send】.
Reboot the switch after successful download and run new application program.
12-13
To Next Page
