windows operating system, con cannot be filename.)
【Command configuration mode】
Privileged mode
【Usage】
Open TFTP server and set file upload path before using this command.
Configuration information saved when uploading is successful.
【Example】
！Upload configuration to 192.168.0.100 by TFTP and saved as abc
QTECH#upload configuration tftp 192.168.0.100 abc
12.2.14 upload logging ftp
Use upload logging ftp command to upload logging by FTP protocol.
upload logging ftp ftpserver-ip filename username userpassword
【Parameter】
ftpserver-ip：IP address of FTP server
12-21
To Next Page
