filename：Filename to be uploaded which cannot be system keyword (such as in
windows operating system, con cannot be filename.)
username、userpassword：Username and password of FTP server
【Command configuration mode】
Privileged mode
【Usage】
Open FTP server and set username, password and file upload path before use this
command. Configuration information saved when uploading is successful.
【Example】
！Upload logging to 192.168.0.100 by FTP and saved as abc
QTECH#upload logging ftp 192.168.0.100 abc username password
12.2.15 upload logging tftp
Use upload logging tftp command to upload logging by TFTP protocol.
upload logging tftp tftpserver-ip filename
12-22
To Next Page
Loading...
