ip-address：System ip address
mask：Netmask
gateway：If only IP address and netmask are configured, and gateway is not, the
gateway will be default to be 0
【Default】
Not to obtain ip address by DHCP、BOOTP.
【Command configuration mode】
Global configuration mode
【Usage】
The way to obtain IP address are by BOOTP、DHCP、and manual operation. If
dhcp or bootp enables, the switch will obtainn the ip address by dhcp or bootp, and
manual operation will be error. If manual operation is wanted, input no dhcp or no
bootp first.
【Example】
12-31
To Next Page
Loading...
