！Original way to obtain IP address is by DHCP. Change IP address by manual
operation to be 192.168.0.100
QTECH(config)#no dhcp
QTECH(config)#ipaddress 192.168.0.100 255.255.0.0
12.4.6 ipaddress vlan
Use ipaddress vlan command to configure and manage VLAN.
ipaddress vlan vlan-id
no ipaddress vlan vlan-id
【Parameter】
vlan-id，ranges from 1to 4094. It must be existed VLAN.
【Default】
VLAN 1 is default to be included in manage VLAN
【Command configuration mode】
Global configuration mode
【Usage】
12-32
To Next Page
