QTECH(config)# show snmp view
12.5.10 snmp-server community
Use snmp-server community command to configure or modify community name
and other information in community list. Use no snmp-server community command
to remove community name in the list.
snmp-server community community { ro | rw } { deny | permit } [ view
view-name ]
no snmp-server community community
【Parameter】
community：The community name, a printable character string of 1 to 20
characters.
ro：Read only
rw：Can be read and write
deny：Cannot be activated
permit：Can be activated
view-name: view configured for community. A string of 1 to 32 printable characters,
12-60
To Next Page
Loading...
