excluding space. The default configuration view is iso.
【Command configuration mode】
Global configuration mode
【Usage】
The community name in nosnmp-server community command should be existed.
【Example】
！Add community red，and configure privilege to be ro，and permit
QTECH(config)#snmp-server community red ro permit
！Remove community red
QTECH(config)#no snmp-server community red
12.5.11 snmp-server contact
Use snmp-server contact command to configure how to contact with administrator.
Use no snmp-server contact command to restore default way of contacting to
12-61
To Next Page
Loading...
