12.5.12 snmp-server host
Use snmp-server host command to send notify by SNMP server. Use no
snmp-server host command to remove SNMP server sending notifies.
snmp-server host
host-addr [version {1 | 2c | 3 [auth | noauth | priv]}]
community-string [udp-port port] [ notify-type [ notifytype-list ] ]
no snmp-server host
ip-address community { 1 | 2c | 3 }
【Parameter】
community：Means community name corresponded by SNMP server sending
notifylist.
1：Means SNMP version 1
2c：Means SNMP version 2c
3：Means SNMP version 3
ip-address：Means IP address in SNMP server notify sending list
port：Means objective host number
notifytype-list：Optional notify list. If it is unoptioned, default to choose all type. Only
optionaed type will be sent to destination host.
12-63
To Next Page
Loading...
