【Command configuration mode】
Global configuration mode
【Usage】
Community cannot be vacant in snmp-server host
version command. Community
name in no snmp-server host command must be the same as that in snmp-server
host.
【Example】
！Configure Trap in SNMP server, the IP address is configured to be
192.168.0.100，and SNMP version to be 2c，and community name to be user
QTECH(config)#snmp-server host 192.168.0.100 version 2c user
12.5.13 snmp-server location
Use snmp-server location command configuration system location.
snmp-server location syslocation
【Parameter】
12-64
To Next Page
Loading...
