system only supports printable characters of engine id which excludes space.
Ip-address is remote engine ip address. Local ip address is not allowed to input.
Port-number is remote engine port number. Default port number is 162
【Default】
Default local engine id is 134640000000000000000000
【Command configuration mode】
Global configuration mode
【Usage】
Local engine cannot be removed, and at most 32 remote engines can be
configured.
【Example】
！Configure local engine id to be 12345
QTECH(config)# snmp-server engineid local 12345
！Configure remote engine that can be recognized locally. Configure remote engine
12-70
To Next Page
Loading...
