Chapter 5 Maintaining Your Library
Maintenance Actions
Scalar i2000 User’s Guide 244
3 To return to the Drives dialog box, click Cancel.
Drive Error Code For LTO drives only, the drive brick error code. This field does not appear for
Fibre drives. If the drive currently has no errors, “No Error” appears in this
field. If the library is unable to acquire a drive error code, such as when the
robotics are disabled, “Unavailable” appears in this field.
RAS Status The status of the drive as reported by the RAS system (for example, Good or
Failed).
Fibre Channel
Loop ID
For Fibre drives only, the loop ID assigned to the drive.
Fibre Channel
Loop ID Mode
For Fibre drives only, the way in which the loop ID is assigned to the drive
(Hard or Soft).
Number of Loads The number of loads during the drive’s history in this library.
Read Errors The number of read errors that have occurred during the drive’s history in this
library.
Write Errors The number of write errors that have occurred during the drive’s history in
this library.
Megabytes Read The amount of data in megabytes that the drive has read during its history in
this library.
Megabytes
Written
The amount of data in megabytes that the drive has written during its history
in this library.
Element Description
To Next Page
Loading...
Need help?
General