RL78/G1H CHAPTER 18 RF TRANSCEIVER
R01UH0575EJ0120 Rev. 1.20 Page 682 of 920
Dec 22, 2016
(3) RF frequency setting for reception
Following descriptions are detail of <2> frequency setting in 18.7.1 (2) Example of procedure for RF
reception.
<1> Set 18.4.3 (53) BBFREQ register according to the RF frequency of reception.
<2> Set the data [7:0] of 0095H address following to the Table 18 - 29 to 18 - 50 according to the RF
frequency of reception.
<3> Set data of 0095H address in IDLE mode.
<4> Frequencies 864 MHz ± 400 kHz and 912 MHz ± 400 kHz are use prohibited.
<5> Set the data [7:0] of 0095H address to 08H for the RF frequency of transmission.
Set also data of 0095H address in IDLE mode for the RF frequency of transmission.
Caution Refer to the latest application note for setting values of Table 18 - 29 to Table 18 - 50 when
to use the product.
To Next Page
Loading...
Need help?
General
