Renesas RL78/G1H

RL78/G1H CHAPTER 31 ELECTRICAL SPECIFICATIONS
R01UH0575EJ0120 Rev. 1.20 Page 863 of 920
Dec 22, 2016
Caution P02 to P04, P71, P80 to P82, and P142 to P144 do not output high level in N-ch open-drain mode.
Remark Unless specified otherwise, the characteristics of alternate-function pins are the same as those of the port pins.
(TA = ‒40 to +85 °C, 1.8 V ≤ VDD ≤ 3.6 V, VSS = 0 V) (4/5)
Items Symbol Conditions MIN. TYP. MAX. Unit
Output voltage, high V
OH1 P02 to P04, P31, P40,
P70 to P72, P75 to P77,
P80 to P82, P100, P120,
P130, P140 to P144
2.7 V ≤ V
DD ≤ 3.6 V,
I
OH1 = ‒2.0 mA
V
DD ‒ 0.6 V
1.8 V ≤ VDD ≤ 3.6 V,
I
OH1 = ‒1.5 mA
V
DD ‒ 0.5 V
V
OH2 P20 to P22, P155, P156 1.8 V ≤ VDD ≤ 3.6 V,
I
OH2 = ‒100 μA
V
DD ‒ 0.5 V
Output voltage, low VOL1 P02 to P04, P31, P40,
P70 to P72, P75 to P77,
P80 to P82, P100, P120,
P130, P140 to P144
2.7 V ≤ V
DD ≤ 3.6 V,
I
OL1 = 3.0 mA
0.6 V
2.7 V ≤ V
DD ≤ 3.6 V,
I
OL1 = 1.5 mA
0.4 V
1.8 V ≤ V
DD ≤ 3.6 V,
I
OL1 = 0.6 mA
0.4 V
V
OL2 P20 to P22, P155, P156 1.8 V ≤ VDD ≤ 3.6 V,
I
OL2 = 400 μA
0.4 V
V
OL3 P60 to P63 2.7 V ≤ VDD ≤ 3.6 V,
I
OL3 = 3.0 mA
0.4 V
1.8 V ≤ V
DD ≤ 3.6 V,
I
OL3 = 2.0 mA
0.4 V