RL78/G1H APPENDIX A REVISION HISTORY
R01UH0575EJ0120 Rev. 1.20 Page 911 of 920
Dec 22, 2016
Remark “Classification” in the above table classifies revisions as follows.
(a): Error correction, (b): Addition/change of specifications, (c): Addition/change of description or note,
(d): Addition/change of package, part number, or management division, (e): Addition/change of related documents
(2/2)
Page Description Classification
p.598 Addition of description to 18.4.4 (30) Baseband interrupt enable register 1 (BBINTEN1) and Figure
18 - 39 Baseband Interrupt Enable Register 1 (BBINTEN1) Format
(c)
p.598 Change of Figure 18 - 39 Baseband Interrupt Enable Register 1 (BBINTEN1) Format (a)
p.599 Deletion of
description in
18.4.4 (31) Baseband interrupt enable register 2 (BBINTEN2) , and
change of Figure 18 - 40 Baseband Interrupt Enable Register 2 (BBINTEN2) Format
(a)
p.603 Change of Figure 18 - 46 Receive Level Threshold Setting Register (BBLVLVTH) Format (c)
p.650 Addition of
descriptions to
18.4.4 (89) Lower limit threshold setting register after SFD detection
(PWRLOWTH2) and Figure 18 - 102 Lower limit threshold setting register after SFD detection
(PWRLOWTH2) Format
(c)
p.662 Change of Table 18 - 15 Function State in Each RF Mode (a)
p.666 Change of 18.7.2 Example of procedure for function setting (c)
CHAPTER 20 STANDBY FUNCTION
p.740, 741 Change of
Note 2 in Figure 20 - 4, Figure 20 - 5
(a)
p.743 Change of 20.3.3 SNOOZE mode setting and operating statuses (a)
p.744 Change of Table 20 - 4 Operating Statuses in SNOOZE Mode (a)
CHAPTER 26 OPTION BYTE
p.800
Addition of
Note 3 to Figure 26 - 1 Format of User Option Byte (000C0H/010C0H)
(c)
CHAPTER 31 ELECTRICAL SPECIFICATIONS
Throughout Change expression of conditions (c)
p.857 Addition of item and Note 3 to 31.1 Absolute Maximum Ratings (c)
p.903 Change of 31.7.7 IEEE802.15.4g frequency/data rate table (a)