SERVICE PROGRAM MODE 26 July 2002
5-40
5
Mode No.
(Class 1, 2, and 3)
Function / [ Setting ]
NVRAM Data Upload 824
1 NVRAM Data Upload
Use this to copy NVRAM data from the machine to a
flash card.
NVRAM Data Download 825
1
NVRAM Data
Download
Imports data from a flash card to the NVRAM.
When data has been normally imported into the
NVRAM, a message appears on the operation panel.
After reading the message, turn the main power switch
off and on. The data of SP7-007 are not imported
through SP5-825.
Network Setting
74 Delete Password Deletes the password.
75
DNS Server From
DHCP
[0 ∼ 1 / 0 / 1 /step]
76 DNS Server 1 Server address
77 DNS Server 2 Server address
78 DNS Server 3 Server address
79
Domain Name
(Ethernet)
Domain name
828
80 Host Name (Ethernet) Host name
HDD
1 HDD Formatting (ALL)
2 HDD Formatting (IMH)
3
HDD Formatting
(Thumbnail)
4
HDD Formatting (Job
Log)
5
HDD Formatting
(Printer Fonts)
6
HDD Formatting (User
Info 1)
7
HDD Formatting (User
Info 2)
8
HDD Formatting
(Scanner Mail)
9
HDD Formatting (Data
for a Design)
832
11
HDD Formatting
(Ridoc interface)
Initializes the hard disk.
[0 ~ 0 / 0 / 0 /step]
• Use this SP mode only for hard disk error recovery.
Job Log Transfer 833*
7 Job Log Transfer Saves the results of jobs in the job log.
[0 ~ 1 / 0 / 1 /step]
• If this mode is enabled, the results of jobs are written
on the HDD.
• 0: Disabled
• 1: Enabled
To Next Page
Loading...
