Instrument Function
R&S
®
SMBV100A
354Operating Manual 1176.8016.02 ─ 17
You may choose from the following data sources:
"All 0, All 1"
0 data or 1 data is internally generated.
"PRBS, PRBS
Type"
PRBS data in accordance with the IUT-T with period lengths between
2
9
-1 and 2
23
-1 are internally generated.
The length is selected in the "PRBS Type" input box.
Remote command:
[:SOURce<hw>]:BB:DM:PRBS[:LENGth] on page 649
"Pattern"
A user-definable bit pattern with a maximum length of 64 bits is inter-
nally generated.
The bit pattern is defined in the "Pattern" input box.
"Data List ...,
Select Data"
Data lists will be used.
Data lists can be generated internally in the data editor or externally.
Data lists are selected in the "File Select" window, which is called by
means of the "Select Data" button.
The "File" "Manager" is used to transmit external data lists to the
R&S SMBV, and can be called within every "File" Select window by
means of the "File" "Manager" button.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 681
Remote command:
[:SOURce<hw>]:BB:DM:SOURce on page 649
List Management
Calls the menu for managing data and control lists (see "List Management"
on page 362).
Remote command:
n.a.
Standard, Symbol Rate, Coding
The middle part of the menu is used for selecting the standard, the symbol rate and the
coding.
Baseband Signal - Baseband Block
To Next Page
Loading...
