Rohde & Schwarz SMBV100A - Page 368

Instrument Function
R&S
®
SMBV100A
353Operating Manual 1176.8016.02 ─ 17
Parameter Value
State Off
Trigger Mode Auto, Source Internal
Clock
Source Internal
Mode Symbol
Remote command:
[:SOURce<hw>]:BB:DM:PRESet on page 649
Save/Recall
Calls the "Save/Recall" dialog.
From the "Save/Recall" dialog the "File Select" windows for saving and recalling the
complete settings in the "Custom Digital Modulation" menu can be called.
The "Digital Modulation" settings are stored as files with the predefined file extension
*.dm. The file name and the directory they are stored in are user-definable.
The complete settings in the "Custom Digital Modulation" dialog are saved and recal-
led.
Remote command:
[:SOURce<hw>]:BB:DM:SETTing:CATalog? on page 683
[:SOURce<hw>]:BB:DM:SETTing:DELete on page 684
[:SOURce<hw>]:BB:DM:SETTing:LOAD on page 684
[:SOURce<hw>]:BB:DM:SETTing:STORe on page 684
Fast Save
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Remote command:
[:SOURce<hw>]:BB:DM:SETTing:STORe:FAST on page 685
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:STORe:FAST on page 632
refer to the description of frimware options for the syntax of the corresponding SCPI
commands
Data Source
The data source is selected and set in the "Data Source" section. The parameters
offered depend on the data source selected. The More button opens a submenu for
calling the data editor and the file manager.
Data Source
Selects the data source (see Chapter 5.9.2, "Data and Signal Sources in Baseband",
on page 326).
Baseband Signal - Baseband Block