222
Transfer conditions
• Press ON at any time to cancel a transfer.
• Received data is stored and appended to existing
data in the selected application.
• After a transfer using GET and SEND on the
keyboard, the data is also automatically assigned
to Filer’s IN folder so that you can check it.
Always try to keep the IN folder empty.
• If a RAM card is installed and selected as the
data source, data in the card can also be se-
lected for data transfer, see p.90.
• For Contacts or Data Files, the receiving file
must be set up with the same fields. If a field type
(text or picture) is different, the field cannot be
transferred.
Be sure that the sending unit does not have a
blank (no characters) Telephone/Contact or User
File/Data File
field name
or else the ZR-5700/ZR-
5800 will not be able to receive information (an
error message will appear).
• GET and SEND on the keyboard do not work for
cable transfers. These keys initiate an infrared
transfer regardless of the selection for Unit to
Unit path or if a cable is connected.
• Transfer of data via the infrared port requires no
other devices. However, infrared transfer is easily
affected by interference from ambient conditions.
Use the optional data transfer cable CE-315L to
ensure a more reliable connection, see p. 220.
Corresponding applications
When transferring data from your unit to OZ-5000/
OZ-6000/OZ-9000 series, the following applica-
tions correspond:
Schedule - Appointment
To Do - To Do
ANN 1 - Holiday (Yearly by date)
ANN 2 - Holiday (Yearly by day)
Tel 1 - Contact 1
Tel 2 - Contact 2
Tel 3 - Contact 3
User File 1 - Data File 1
User File 2 - Data File 2
User File 3 - Data File 3
Notebook, Memo - Documents
Outline - Outlines
Scrapbook - Scrapbook
• For Appointments, Contacts and Data Files
entries, if the Filter function is turned on, only
filtered entries are sent. For Filer, transferred
entries are stored in the proper source applica-
tions and are also automatically assigned to the
IN folder on the receiving unit. After the transfer,
move IN folder data to another folder, see p. 77.
• When transferring data from the OZ-5000/OZ-
6000/OZ-9000 series to the ZR-5700/ZR-5800
from an application in different format, a warning
message may be displayed.
You should check whether all the data was
transferred successfully after selecting OK.
To Next Page
Loading...
Need help?
General
