Sharp Zaurus ZR-5700

131
Posting messages to a forum on-line
1 . When you are in the desired section of a
forum, go to the OUT tray.
2 . If necessary, tag the messages you want to
send. Then touch SEND and select “Send
Forum Messages....”
3 . In the Send Messages dialog, set the Send
option, then touch OK.
NOTE
• You must post the messages while you are in the OUT
tray.
• To post messages to a forum, you must be in the same
forum.
Getting responses to your forum
messages
1 . When you are connected, the following
prompt appears if there are waiting mes-
sages.
2 . Touch Yes to see these messages.
If you touch No, you can still see the waiting
messages later when you are on-line; while
in the section view of a forum, touch FILTER,
then select “Waiting Messages....”