64
Chart titles
You can add a chart title to enhance your chart, as
follows:
1.
Touch EDIT, then select “Chart Title....”
2.
Type a chart title, up to 25 characters.
3.
Touch OK.
To show the title, touch SHOW, then select “Show Title.”
Displaying gridlines
Gridlines can aid in the visual comparison of data. You
can add gridlines to column, stacked column, and line
charts.
To show the gridlines, touch SHOW and select “Show
Gridlines.” To hide, repeat the same and select “Hide
Gridlines.”
Displaying the legend
The chart legend is based on the data in the worksheet
columns to the left of the selected range. The legend
provides a key to differentiate the patterns in the chart.
To show the legend, touch SHOW and select “Show
Legend.” To hide, repeat the same and select “Hide
Legend.”
Exchanging the X and Y axes
When you originally create your chart, the horizontal or
x axis is determined by the data in the selected rows.
The vertical or y axis comes from the data in the
selected columns. You can switch the axes so the x axis
comes from column data and y axis comes from row
data.
To swap, touch the X
Y SWAP in the lower left corner
in the Chart mode.
Exiting and saving a chart
To exit without saving the current chart, touch CANCEL.
The worksheet display will appear.
Saving a chart
You can save up to 20 charts with any worksheet. To
save, change the display mode from Chart to
Worksheet, Index or Chart (may be faded out if there is
no previously saved chart for the current worksheet).
1.
Touch VIEWS, then select “Worksheet”,
“Index” or “Charts....”
To Next Page
Loading...
Need help?
General
